Material Handling Buckets
The ACS Material Handling Bucket is designed to maximize bulk material handling productivity. Typical applications include stockpiled dirt and re-handling loose material such as grain, coal, coke, etc. It has a larger capacity than a standard digging bucket. No teeth are installed to allow materials stored on prepared surfaces to be cleaned completely. This bucket configuration is generally not optimal for any type of primary digging.
Material Handling Buckets Links
Tech Specs
Common Materials
A short list of materials commonly handled with the ACS Material Handling Bucket :- Ashes
- Cereals
- Coal
- Coke
- Dirt/Rock Mix
- Graveled Sand
- Salt
- Sand
- Sawdust
- Sugar
- Wheat
| Excavator Size | Cut Width
Over Sides |
Capacity
Cubic Yards |
Edge | Weight
US Pounds |
|---|---|---|---|---|
| Bucket capacities reflect SAE heaped standards. All weights are approximate. Weights are estimated assuming no add-ons, options or payloads. | ||||
| Class 10 8.0-14.0 Metric Tons 17,600-30,800 lbs |
60" | 1.2 | Bolt-On Edge | 1,148 lbs |
| Class 15 14.0-18.0 Metric Tons 30,600-39,600 lbs |
60" | 1.27 | Bolt-On Edge | 1,250 lbs |
| Class 20 18.0-22.0 Metric Tons 39,600-48,400 lbs |
72" | 1.80 | Bolt-On Edge | 1,925 lbs |
| Class 25 22-28 Metric Tons 48,400-61,600 lbs |
72" | 2.10 | Bolt-On Edge | 1,950 lbs |
| Class 30 22-28 Metric Tons 48,400-61,600 lbs |
72" | 2.75 | Bolt-On Edge | 2,740 lbs |
| 84" | 3.25 | Bolt-On Edge | 3,210 lbs | |
Features
-
Bolt-On Edge
Comes installed with beveled, wear-resistant steel edge that takes the brunt of all first-contact impacts. Double-sided for twice extended life; when one side wears down, simply turn it around to expose the fresh edge.
-
Dual Reinforced Header
Zero flex means a full transfer of force from the stick to the cutting edge. Reduces tip radius for greater productivity.
Options
-
Drainage Perforations
Provide fast escape routes for unwanted liquid in your payload. -
Poly-Lining
Protect your attachment from corrosive materials such as fertilizer and animal waste with a durable, protective Poly-Liner. The Poly-Liner also serves as a non-stick surface that helps release "sticky" materials such as animal waste, clay, mud and kaolin soils, reducing material "carry back". The Poly-Liner material is formed to fit the contact surfaces of your attachment. The liner is secured by metal weld washers and support strips that prevent material from getting under the leading edges of the liner. Thickness of the liner varies depending on attachment size and service duty.